Subscribe via email

Enter your email address:

Delivered by FeedBurner

12.31.2008

Proton Wira Alien Eye

This is another exterior modification on Proton Wira. This modification only concentrates on the front look of the car. The first time I look this car, I can't recognize what the original it is. I know it is Proton Wira when look at its door!








The front side of this car totally changes from its original. With custom made front bonnet, eyelids, bumper and lips make this car amazing. The trademark of this car was it head lamp. Look like alien eye. Errrrr. Isn’t it?


Want custom made body kit? Contact us now!

Recommended: 
Whiteline Rear Swaybar mount-h/duty kit... 
Mitsubishi Lancer Mesh Grille 08-09

12.30.2008

Converting Proton Perdana To Nissan Skyline R33.

Before this, I have post several modifications on exterior of Proton Perdana. Some look sporty and other look VIP. Also, the previous post, a conversion from Nissan Cefiro to Nissan Skyline R34 was done. Meanwhile, this post will show up the conversion from Proton Perdana to Nissan Skyline R33!!!

Basically, this is a first batch of Proton Perdana that produce around 1996.This car look too old after using by the owner for nearly 12 years, and sure it's entire body being horrible! That why the owner feels that he's Proton Perdana should have a new look.

This conversion starts with a little research. AL Motorsport found that Proton Perdana have a potential shape to become Nissan Skyline. Their dimension was utmost same. That make they decide to convert this Perdana to Skyline. Now, the question is; what model of Skyline? Because they had doing conversion to Nissan Skyline R34 before, and the owner want he's car still remain 4 doors, so they decide to convert this Perdana to Nissan Skyline R34.

Frankly, this is not easy job. Evan some aftermarket Nissan Skyline R33 bodykit can be found out there, it is not easy to fixed up to the Perdana. A huge modification must be done to that bodykit. And some part such as tail lamp cover, lips and bonnet are totally customize.

Finally, after several weeks of hard work, this dreamed conversion come true. Enjoy the picture.



Recommended: 
Nissan 1995-1998 Nissan Skyline... 
Seibon OEM hoods (Nissan | Skyline...

12.28.2008

Just Nice: Toyota Estima

If you think custom bodykit is just for cheap local car, you are totally wrong!!! All car can enjoy their very own bodykit. This post, we will show you a custom made bodykit for Toyota Estima. Even Estima is decent as luxury mpv, the owner want it looks different then other Estima. This Estima just through a simple modification. Some wide body, all over skirting, rear spoiler, and both custom bumper.


Look a the skirt. It is combination of three different skirt. Amazing! Besides, the skirt make this Estima look lower even nothing do with it suspension. Also, the stylish rear bumper and spoiler was attached to this Estima. It make this Estima look longer than other. To make this Estima wider, some fiber was installed on the rear side. It starting from the middle of rear door to the tail lamp. To make the wide body more shining, a little paint stripe was done starting from head lamp to the end of front door at top side. Meanwhile, the the paint stripe was done at lower side of front door and it connect with a beginning point of the wide body.



The front side look ordinary, but exclusive. The bumper look like Proton Wira SE bumper, but the design have a chemistry with this Estima. Just nice...



Recomended: 
Dyno-Boost Performance Chip Toyota... 
Rear Bumper Protector for 2010...

12.26.2008

International Xtreme Autoshow

Today, 26 Dec 2008 till 28 Dec 2008 an International Xtreme Autoshow will be held at Putra Stadium Bukit Jalil. If you are true blue modified car lover, you should go to this event. The greatest modified car from the US and South East Asia will be gather here. This is your chance to look to the new technology and creativity of modified car. This event organize by kelab autoshow and support by Tourism Malaysia. The Kustomizer and Big Daddy is some of the star that comfirm to join this event.

I'm not sure about ticket, i think it is RM30. Go to this site for more info.


Recommended:  Rated R Metal License Plate

12.22.2008

Proton Wira Persona

Another Protan Wira bodykit modification and another confusing title.















From the front side, this Proton Wira most look like Proton Persona. The front bonnet cover, spot light, lips and front light very similar with Proton Persona. In addition a custom hole was made to the bonnet to help air suction and ventilation on the engine. Meanwhile, the bumper, lips and front skirt was made as a single unit. For make this Wira look great, a dummy intercooler was installed behind the front bumper.


As usually, AL Motorsport make a wide body on the wheel arc, and that was attached to Evolution II side skirt. Meanwhile, the door also through a little bodykit modification. A wide and embarked stripe was attached on the lower side of the door.

I khow this is Proton Wira when I look at the rear side! An original Wira tail light still remaining on this Proton Wira Persona. Furthermore, a costum rear bumper and GT wing was installed to this Proton for enhanced it's exterior design.

Recomended: 
2002-2003 Mitsubishi Lancer Evo... 
2002-2007 Mitsubishi Lancer Evo...

12.21.2008

Toyota SEG1.6 Vip Look

Before this, i have post a Toyota SEG Sporty Style. Now, enjoy the Toyata SEG conversation to VIP look.












Smart isn't it? With 19inch deep wide sport rim, this SEG look very perfect.

As usual, AL Motorsport make a wide body at the wheel arc of this Toyota. Furthermore, the side skirt is very exclusive design and it's attached with the wheel arc of this Toyota.

The custom made spoiler also is just amazing! Not to huge like GT wing, or small like standard Proton Wira Sedan. Just nice...
In addition, the original rear bumper was used with custom made rear skirt that attached with the wheel arc.
Besides, the two exhaust mean that this Toyota have powerful engine.

From the front this SEG look nearly similar with Skyline R34. Some eyelids was attach to front light with costom made lips, front bumper and spot light. And last but not least, the bumper had through some modification to fit with this Toyota front look design.

Recomended: 
03-08 Toyota Corolla Spoiler Wing... 
BUMPERS and PARTS for TOYOTA...

12.20.2008

http://junichishimo.blogspot.com

Thank JyhSing (it is very hard to type your name - huuhuhuu).

Actually, this is a personal blog. But, the writer has a passion with car technology. He had some link to great car club such as vipdreamclub. Sometimes he post latest car aftermarket product. Sometimes, he wrote about latest news and announcement for modified car lover sphere. And sometimes he sells a car on his blog.

But, most a time, he wrote about his personal live...

Recommended: 
NISSAN 2000-2006 SENTRA NISMO... 
NISSAN 2003-2008 350Z CUSTOM...

12.19.2008

Nissan Cefiro Skyline R34

Nissan Skyline R34 can be decent as supercar but it rarely found in Malaysia. Usually, the owner of Nissan Skyline brought it direct from Japan.

Now, with technology and creativity, you doesn't have to fly to Japan to buy a nice Nissan Skyline. Just bring your old Nissan Cefiro to AL Motorsport garage, and they will change your Cefiro like this!!!
Actually, AL Motorsport have make this standard Cefiro body wider. To make that, custom wider whell arc was atthed to the Cefiro and it extent to rear door that totally sealed. Meanwhile, the rear bumper and skirting totally copycat from the original Nissan Skyline R34

The trademark of Nissan Skyline R34 should be it tail light. Maybe Mercedes get an idea of their Compressor front light from the Skyline!!! Besides, the GT wings was installed to this Cefiro to make it very similar with Skyline.

From the front sight, the conversation look very perfect. Nobody knows that tha car is origally Cefiro! Skirting, bumper, lips, headtail light, front bonet and even a side mirror very look like Skyline R34.

What a perfect conversition.

Recommended:  
1995-1998 Nissan Skyline R33... 
1989-1994 Nissan R32 Skyline...

Nissan Cefiro Skyline R34: Construction

This post title little bit confusing? Huhuhuhuh.

Actually, the purpose of this work are to convert Nissan Cefiro 2.o to Nissan Skyline R34.

Nissan Cefiro is produce to compete with other high class Japan car such as Toyota Camry or Honda Accord. But, this Cefiro i think only suitable to the "pakcik-pakcik" senior citizen or "mamat skema" nerd profesional because of its boring exterior body.

But, actually, something great about this Cefiro is about its chasis. Nissan Cefiro has a long, wide and aerodynamic chasis. Besides, it have big engine compartment and it fit to larger boxer engine. This two reason is why the owner of this standard Nissan Cefiro want to convert it became Nissan Skyline R34.

Here, the picture on constructing the Nissan Skyline R34 from a oldy Nissan Cefiro.


12.16.2008

Stylish Mercedes S Class 420: Closer Look

The picture shoot for the Mercedes of the previous post was not close enough to you see the details shape of this stylish bodykit. Here we come, the closer picture of Stylish Mercedes S Class 420. Enjoy!










p/s: If you want to customize your bodykit like this Merc, please leave your phone number or emel on the shoutbox.

12.15.2008

Stylish Mercedes S Class 420

In Malaysia, Mercedes was decent as luxury car. Everyone dream it, maybe.

This entry will show the Stylish Mercedes S Class 420. Even the standard Mercedes S420 has his stylish look, the owner feels that not stylish enough, so he decide to bring his Merc to AL Motorsport garage. And..here we come, the new look Mersedes S420.

Actually, this Mercedes just through a standard bodykit modification. Just add side a side skirt and rear spoiler.

Besides, some modification was done on the rear bumper. The original bumper was change to custom one and little front skirt was added. Look carefully, the bumper and the front skirt was attached smoothly.

The rear bumper also through a light modification. Besides adding a skirt, the original rear bumper has attach with huge fiber stripe and it's make the bumper looks amazing.

Another AL Motorsport's modification on the rear side of this Merc is the spoiler. This custom spoiler make the Mercedes strectch on it's look. Besides, the plate number holder has through simple modification, but, it make look this Mercedes look different then other.

Look at a front light. A creative stripe was added onto the light, and it make the original boxy shape totally change!

Last, but not least the side skirt. It is a combination of three side skirt!!!

p/s: To contact AL Motorsport, just emel us at autolure[at]gmail[dot]com or call mafioso at 013-744 2468

12.10.2008

Knowing Nissan Engine

Nissan is a great competitor in automotive industries. Interestingly, Nissan have a great method to naming their engines, and is not very difficult to understand that.

Basically, thare was three types of Nissan engine

1. SR
The SR engine is a 1.6 L, 1.8 L, or 2.0 L straight-4 4-stroke from Nissan. It is an aluminum DOHC 4-valve design, with some versions incorporating variable valve timing. The engine was used in many small to medium Nissan vehicles, including high-performance turbocharged variants.

2. RB
The RB engine is a 2.0L to 3.0L straight-6 four-stroke gasoline engine from Nissan.
Both SOHC and DOHC versions have an aluminum head. The SOHC versions have 2 valves per cylinder and the DOHC versions have 4 valves per cylinder, all cam lobes move only one valve. All RB engines have belt driven cams and a cast iron block. All turbo models have an intercooled turbo (except the single cam RB20ET & RB30ET engines), and most have a recirculating factory blow off valve (except when fitted to Laurels and Cefiros) to reduce boost surge when the throttle is closed.
Some sources indicate the 'RB' name stands for 'Race Bred'[1], although this is disputed. The Nissan RB Engine is derived from the 6 cylinder Nissan L20A engine which has the same bore and stroke.

3. VQ
The VQ engine is a V6 motor produced by Nissan with displacements varying from 2.0 L to 4.0 L . It is an aluminum block DOHC 4-valve design with aluminum heads. It is fitted with Nissan's EGI/ECCS sequential multi-point fuel injection (MPFI) system. Later versions feature various implementations of variable valve timing and replace MPFI with direct fuel injection (marketed as NEO-Di). This engine family is widely considered to be the world's benchmark V6 engine for its combination of smoothness, reliability and high power output. The VQ series is the only engine to be honored by Ward's 10 Best Engines list every year since the list's inception.


Ok? I hope you understand. Besides, normally after the engine types (SR, RB or VQ) there has numbering such as 20, 23, or 40. That means the engine capacity. Let's says 23, mean that the engine has 2.3L engine capacity. Easy..huh?

After the engine capacity, Nissan engine must have some letter such as D, E etc. The letter and what it represent for is show below

Letter - Features
D - DOHC, Variable Valve Timing, Direct Injection, Diesel
E - Electronic Fuel Injection
HR - High Response and High Revolution
i - Throttle Body Fuel Injection
N - Natural Gas fueled
P - LPG fueled
R - Supercharged
S - Electronic Controlled Carburetor
T - Turbocharger or Twin Carburetor
TT - Twin Turbocharger

Quite confusing? Here same example...

Engine SR20DET, that means,
SR - Engine type
20 - 2.0L engine capacity
D - DOHC, Variable Valve Timing
E - Electronic Fuel Injection
T - Turbocharger

Other example, engine VQ23DE, means that
VQ - Engine type
23 - 2.3L engine capacity
D - Variable Valve Timing
E - Electronic Fuel Injection

-composed from wikipedia-

p/s: Need more info? Subscribe for autolure news letter at the top right side of this blog

Recommended reading: 
How to Build Performance Nissan... 
Nissan Motors: Automaker, Nissan VQ...



12.09.2008

Perodua Myvi Goose Nose: Final Touch

This is the complete Perodua Myvi Goose Nose that unfinished yet that shown in the previous post. Looks nice and stylish. Isn't?

At the back of this Perodua, it has a simple look. Just have spoiler and custom made rear bumper. The rear bumper suit with double exhaust that use by this Myvi.


Look at wheel arc. It's come wider to match with the wide tire. Besides, the side skirt was combine with two after market side skirt and it's perfectly combine.


Basically, the trademark of this Perodua was it hood. The hood has three layer custom fiber and it's make this car look extradinory.

Meanwhile, the lips is smooth connect with the bumper and it's make the Perodua look stylish. Amazingly, the bumper was the original Myvi. Just little and creative front skirt adding by AL Motorsport.
Recommended reading: Daihatsu: Daihatsu Vehicles, Daihatsu Charade...
Recommended product: Whiteline Rear Swaybar-heavy duty..
 

12.03.2008

Perodua Myvi Goose Nose : Unfinished Yet...

Perodua Myvi is the popular model of Perodua. Even it is have a same platform as Daihatsu, but, Perodua make a lot of change to improve it. Myvi is well-known as fuel save and powerful car. Myvi popularity and performance easily hit Savvy, the model that produce by Proton in compact car segment.





With a nice look and body shape, actually the exterior of Myvi are nearly perfect. But, AL Motorsport never was satisfied with the standard car. So, a little modification was made to this Myvi. As usual, the front and rear bumper, also the side skirt was been replace and added. Besides, the spoiler to improve it's aerodynamic. Lass, but be the trademark of this Myvi, is it modification on front bonnet. I called it goose nose. I don't know why, but I feel that the bonnet looks like goose nose. Errr..isn't it?



Recommended product: 
Dyno-Boost Performance Chip Daihatsu... 
Daihatsu Key Chain

LinkWithin

Blog Widget by LinkWithin